TMS 5 Topographic Modeling System

Anterior and posterior analysis of cornea Scheimpflug images without a dark room With a very short image capture time of 0.5 seconds Comprehensive analysis applications Support of the conventional TMS exam data

Rapid measuements with Scheimpflug   In the Scheimpflug mode, the TMS 5 can automatically capture multiple slices by focusing the alignment light on the center of the cornea as it does with Ring Topography. The time it takes to measure in this mode is approximately 0.5 to 1.0 seconds. This is very similar to the measurement time of the Ring Topography.   Scheimpflug Images without a dark room   Since the slit light used in the Scheimpflug mode is emitted inside the cone, similar to the conventional TMS models, The TMS 5 is capable of capturing an image without a darkroom.

Ring - Topo Image Scheimpflug - Topo Image

=

Marged - Topo Image

Precise Analysis   By merging both the Ring Topography and the Scheimpflug Topography, more accurate and reliable results can be achieved. This method eliminates the mis-trace that you would sometime see with the conventional TMS device.

Real Power Map

Anterior and Posterior elevation Map

Pachymetry Map