Wide Measurement Range
Measurement range of Sph-25.00D to +25.00D, Cyl -10.00D to + 10.00D |
|
|
|
|
2.3 mm Minimum Pupil Diameter & 3 steps Target LKight Adjuster
Allows you to measure much smaller pupils than conventional units and 3 steps Target Light Adjuster ensures accurate results. |
|
|
|
|
Clear 5.6 inch LCD color monitor
LCD color monitor produces superb colorful display of the icons for easier identification to select your desired choices for measurement. |
 |
|
|
|
Data Screen Function
Measured data can be seen on the monitor without printing. |
 |
|
|
|
3 Steps Monitor angle
Monitor angle can be tilted in 3 steps that allows comfortable operation for both stand-ing and sitting positions. |
 |
|
|
|
Choise of the format of printout
Format of the print out, ALL, ECONO, and OFF, can be set on the mode selection. |
|
|
|
|
Quick Printer with Automatic Cutter
Printing paper is automatically cut when it is released. |
 |
|
|
|
Auto Start Function
Auto Start Function allow measuring automatically when alignment meets measure-ment requirements. |
|
|
|
|
Quick Measurement Function
Quick Measurement Function realizes 1-10 times continuous measurements by pushging the measurement button once. |
|
|
|
|
Measurements Function
Accuref 8001 has the function to measure the IOL (Intraocular lens) implanted eye. |
|
|
|
|
RC-232C Setting Function
With this function, you can send the measurement data to an external computer through an interface. The data is sent using ASCII CODE.
|
|
|
|
|
Output Terminal
This terminal outputs an NTSC video terminal. If you connect an extrernal monitor, you can observe the same image that appears on the internal monitor screen of Accuref 8001 simultaneously. |
|
|
|
|
Power Saver Function
The switchover time can be selected on the menu screen. |
|
|
|
|
| |
|
|
|
|
