Three levels are available -H (High), N (Normal), L (Low). Continous working at high setting must be avoided, as the service life if the bulb will be shortened.
Hruby lens kit standard
Use it to store the focusing test rod and the other accessories.
Base Locking Screw
The base will be locked when this screw is fastened.
Aperture and slit height control knob
Rotate this knob to adjust the spot and slit heihgt.
Swing the knob horizontally to revolve the slit.
Single-handed elevation Joystick
Incline it to move the instrument slightly on a horizontal surface and rotate it to adjust the elevation of the microscope.
Pencil-point fixation light
An illuminated fixed spot for the patient’s to look at.
Type: Cross-angle stereovision
Model of magnifying: Change the objective for 2-grade magnification
Eyepiece: 10x and 16x
Total magnification rate: Objective x Eyepiece = magnification rate / vision field
1x 10x: 10x ø18mm/0.7in
1.6x 10x: 16x ø14.5mm/0.57in
Range of P.D. adjustment: 10x eyepiece 55mm/2.16in to 82mm/3.23in
Diopter adjustment: 10x eyepiece ±6D
Slit projection magnification: 2/3x
Slit width: contiuous from 0mm/0in to 9mm/0.35in (at 9mm/0.39in, slit becomes a circle)
Slit height: continuous from 1mm/0.039in to 8mm/0.315in
Aperture diameter: ø9mm,ø8mm,ø5mm,ø3mm,ø2mm,ø1mm,ø0.2mm
Slit angle : 0° to 180° with horizontal scanning capability
Slit inclination: 5°, 10°, 15°, 20° four steps
Filter piece: heat-absorption, grey, red-free and blue
Illumination bulb: 12V30W halogen bulb
Fore and back movement: 90mm/3.54in
Left and right movement: 100mm/3.93
Fine movement: 15mm/0.59in
Vertical movement: 30mm/1.18in
Vertical movement: 80mm/3.15
Fixation target: Red-LED
Input voltage: 100/220V ~ ±10%
Input frecuency: 50/60 Hz
Input power 58VA
Output voltage: Illumination bulb 9.9V, 11.6V Fixation target 7.2V
Electric safe standard: Conform to Standard IEC601 - 1, Class I Type B
Dimension and weight
Packing box: 670 x 570 x 510mm / 26.37 x 22.44 x 20in
Total weight: 23 Kg / 50.6 Lb
Net weight: 20 Kg / 44 Lb