Five steps magnification range from 6x to 40x without changing the eyepiece, only twisting a single knob.
The SL - 1400 Slit Lamp presents an optic system ideal for technically advanced imaging systems.
Through the utilization of the optical beam splitter that presents an ‘’in-out’’ prism system, the SL - 1400 Slit Lamp allows maximum illumination to the practitioner during the observation and at the same time to the digital and video imaging system when it is in position.
This dual port beam splitter permits an assistantscope to be attached.
Accept the model R - 9000 Goldman applanation tonometer as other accessories.
Before using the slit lamp, adjust the proper diopter for each eyepiece to obtain a definite image.
Two kinds of fixation targets are available.One is for diopter adjustment to help the patient to see the target clearly while the other is illuminated at a fixed spot.
Base locking screw
The base will be locked when this screw is fastened.
Optional accesories (additional purchase)
10x measuring eyepiece
Replace the common eyepiece with this to measure the length and angle.
Length scale: 16mm/0.63in (0.5mm/0.019in minimum graduations)
Angle scale: 360º (5 minimum graduations)
Length scale: To be used at 10x only
Diopter compensation: -5D to + 3D
Angle scale: No limitation
This SL-14000 slit lamp can be equipped with TN-150, Model R-900 or Model T-900 applanation tonometer to measure the intraocular pressure.
Provide a visual method to conduct a demostration for a large audience. Allow images to be placed on videotapes or store in a computer, if TV camera is installed.
Type: Galileo magnification changer with converging
Model magnifying: 5 steps by drum rotation
Total magnification rate: 6x 10x 16x 25x 40x
(Field of view): (ø33mm) (ø22.5mm) (ø14mm) (ø8mm) (ø5.5mm)
(ø1.3in) (ø0.88in) (ø0.55in) (ø0.31in) (ø0.22in)
Range of P.D. adjustment: 55m/2.16in to 75mm/2.95in
Diopter Adjustment: -5D to +3D
Slit projection magnification: 2/3x
Slit width: continuous from 0mm/0in to 9mm/0.35in (at 9mm/0.35in, slit becomes a circle)
Slit eight: continuous from 1mm/0.039in to 8mm/0.315in
Aperture diameter: ø9mm,ø8mm,ø5mm,ø3mm,ø2mm,ø1mm,ø0.2mm
Slit angle: 0º to 180º with horizontal scanning capability
Slit inclination: 5º, 10º, 15º, 20º four steps
Filter piece: heat-absorption, grey, red-free and blue
Illumination bulb: 12V30W halogen bulb
Fore and back movement: 90mm/3.54in
Left and right movement: 100mm/3.93
Fine movement: 15mm/0.59in
Vertical movement: 30mm/1.18in
Vertical movement: 80mm/3.15
Fixation target: Red-LED
Hurby lens: -58.7D (optionally available in some regions)
Input voltage: 100/220V ~ ±10%
Input frecuency: 50/60 Hz
Input power: 58VA
Output voltage: Illumination bulb 7.2V, 9.8V, 11.6V
Fixation target 7.2V
Electric safe standard: Conform to Standard IEC601 - 1, Class I Type B
Dimension and weight
Packing box: 720 x 495 x 480mm / 28.35 x 19.49 x 18.9in
Total weight: 24 Kg / 52.9Lb
Net weight: 21 Kg / 46.3 Lb
Microscope Type :
Total Magnification :
Diameter of Visual Field :
DioPter Adjustment :
Slit Height :
Aperture Diameter :
Slit Angle :
Slit Inclination :
Illumination Bulb :
Input Voltage :
10x , 16x
6X; 10X; 16X; 25X; 40X
15mm; 10mm; 6mm
10X eyepiece: 6D
16X eyepiece: 15D
0mm - 9mm continuously adjustable
1mm - 8mm continuously adjustable
9mm , 8mm , 5mm , 3mm , 2mm , 0.2mm
0* - 180*
0* - 23*
heat absorption, grey, redfree, cobalt blue
halogen bulb 12V30W
110 V / 220 V - 50 Hz / 60 Hz